document number: 34162 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 28-feb-11 1 surface mount, multilayer high frequency ceramic inductors ilc-0805 vishay dale mechanical specifications solderability: 90 % coverage after 5 s dip in 235 c solder following 60 s preheat at 120 c and type r flux dip resistance to solder heat: 10 s in 260 c solder, after preheat and flux above terminal strength: 0.6 kg (1.32 lbs) for 30 s termination: 100 % tin beam strength: 1.0 kg (2.20 lbs) flex: 0.0788" [2.0 mm] min. mounted on 0.063" [1.6 mm] thick pc board features ? high reliability ? surface mountable ? reflow or wave solderable ? tape and reel packaging per eia specifications: 4000 pieces on 7" reel ? compliant to rohs directive 2002/95/ec ? halogen-free according to iec 61249-2-21 definition environmental specifications operating temperature: - 55 c to + 125 c thermal shock: 100 cycles, - 40 c to + 85 c humidity: + 40 c, 85 % rh, 1000 h at full rated current load life: 85 c for 1000 h at full rated current standard electrical specifications part number ind. (nh) tol. thickness d (inches [mm]) test freq. (mhz) q min. q typical srf (mhz) dcr max. ( ? ) rated dc current max. (ma) 100 mhz 500 mhz 1000 mhz min. typ. ILC0805ER1N5S 1.5 0.3 nh 0.035 0.008 [0.90 0.2] 100 10 16 43 67 4000 7000 0.10 300 ilc0805er1n8s 1.8 0.3 nh 0.035 0.008 [0.90 0.2] 100 10 16 56 59 4000 7000 0.10 300 ilc0805er2n2s 2.2 0.3 nh 0.035 0.008 [0.90 0.2] 100 10 16 40 58 4000 7000 0.10 300 ilc0805er2n7s 2.7 0.3 nh 0.035 0.008 [0.90 0.2] 100 12 16 43 60 4000 6500 0.10 300 ilc0805er3n3s 3.3 0.3 nh 0.035 0.008 [0.90 0.2] 100 12 19 52 70 4000 5500 0.13 300 ilc0805er3n9s 3.9 0.3 nh 0.035 0.008 [0.90 0.2] 100 12 19 52 75 3000 4400 0.15 300 ilc0805er4n7s 4.7 0.3 nh 0.035 0.008 [0.90 0.2] 100 12 19 53 70 3000 3500 0.20 300 ilc0805er5n6s 5.6 0.3 nh 0.035 0.008 [0.90 0.2] 100 15 19 53 70 3000 3500 0.23 300 ilc0805er6n8j 6.8 5 % 0.035 0.008 [0.90 0.2] 100 15 19 44 60 2500 3300 0.25 300 ilc0805er8n2j 8.2 5 % 0.035 0.008 [0.90 0.2] 100 15 19 45 60 2000 2600 0.28 300 ilc0805er10nj 10 5 % 0.035 0.008 [0.90 0.2] 100 15 20 53 60 3000 2300 0.30 300 ilc0805er12nj 12 5 % 0.035 0.008 [0.90 0.2] 100 15 20 36 45 1500 2000 0.35 300 ilc0805er15nj 15 5 % 0.035 0.008 [0.90 0.2] 100 15 20 46 45 1500 1800 0.40 300 ilc0805er18nj 18 5 % 0.035 0.008 [0.90 0.2] 100 15 20 52 45 1300 1700 0.45 300 ilc0805er22nj 22 5 % 0.035 0.008 [0.90 0.2] 100 18 20 40 31 1200 1400 0.50 300 ilc0805er27nj 27 5 % 0.035 0.008 [0.90 0.2] 100 18 20 44 29 1000 1300 0.55 300 ilc0805er33nj 33 5 % 0.035 0.008 [0.90 0.2] 100 18 20 36 15 1000 1200 0.60 300 ilc0805er39nj 39 5 % 0.035 0.008 [0.90 0.2] 100 18 20 36 12 800 1100 0.65 300 ilc0805er47nj 47 5 % 0.035 0.008 [0.90 0.2] 100 18 21 33 12 800 1000 0.70 300 ilc0805er56nj 56 5 % 0.035 0.008 [0.90 0.2] 100 18 21 31 9 700 900 0.75 300 ilc0805er68nj 68 5 % 0.035 0.008 [0.90 0.2] 100 18 21 30 - 600 800 0.80 300 ilc0805er82nj 82 5 % 0.035 0.008 [0.90 0.2] 100 18 22 26 - 500 700 0.90 300 ilc0805err10j 100 5 % 0.035 0.008 [0.90 0.2] 100 18 22 22 - 500 700 0.90 300 ilc0805err12j 120 5 % 0.035 0.008 [0.90 0.2] 50 13 22 17 - 400 600 0.95 300 ilc0805err15j 150 5 % 0.035 0.008 [0.90 0.2] 50 13 22 9 - 300 600 1.00 300 ilc0805err18j 180 5 % 0.035 0.008 [0.90 0.2] 50 13 21 8 - 300 500 1.10 300 ilc0805err22j 220 5 % 0.035 0.008 [0.90 0.2] 50 12 20 4 - 300 500 1.20 300 ilc0805err27j 270 5 % 0.035 0.008 [0.90 0.2] 50 12 24 17 - 200 400 1.30 300 dimensions in inches [millimeters] description ilc-0805 10 nh 10 % er e3 model inductance value inductance tolerance package code jedec lead (pb)-free standard global part number ilc 0805 er 10n l product family size package code inductance value tol. ceramic body d 0.020 0.001 [0.50 0.3] 0.079 0.008 [2.0 0.2] 0.049 0.008 [1.25 0.2]
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
